Duotone Aero Carve 2.0 SLS Wing Set 2024

$729.00$769.00

SURF / FREESTYLE / KITE WING SET

Building on the success of our latest range of Duotone Carve wings, the design goal of the Carve 2.0 was to push the performance of these mid aspect wings even further.

Duotone
Clear
Share this product!

Description

Building on the success of our latest range of Duotone Carve wings, the design goal of the Carve 2.0 was to push the performance of these mid aspect wings even further.

Our team riders wanted more glide, more speed and less drag, all whilst increasing the manoeuvrability and maintaining our trademark control at high speed.

We decided to start from a blank page and pretty much changed all the design parameters of the wing: higher aspect ratio, new outline and curvature, new profiles and twist along the wing.

Not only that but each individual size has been tuned independently to best fit its intended use. The bigger 1430 for example has the lowest aspect ratio and thinnest profile, to maximise maneuvrability and reduce the drag, on the opposite side, our 850 as the highest aspect ratio and thickest profile, to improve the lift and delay the stall on such a small wing.

The Carve 2.0 is the go-to wing if you want to tackle “real waves”. What it sacrifices in terms of glide compared to the Free or the Glide, it makes up with higher top end speed and way more manoeuvrability on the wave face.

The Carve 2.0 is also the preferred choice of our freestyle team competing on the world tour. These wings allow them to load up for their jumps with more speed which translates into a more explosive pop. The medium aspect ratio also means that the hard landings are a lot less stressful for the rest of their gear.

This same medium aspect ratio is also what makes the Carve 2.0 wings a great choice for Kite Foiling. Riders can lean on their mast more aggressively without the wing tips coming out of the water. If you are an intermediate to advanced rider looking at the one wing that can do it all, from Wing Foiling in big waves to high-speed runs on the Kite Foil, the Carve 2.0 is the answer!

Stabilizer P:

Our latest range of stabilizers, specially designed to complement our Carve 2.0 and Glide ranges. The P series stands for performance! We increased the aspect ratio of the stabilizers so that they would produce more lift whilst being smaller in surface area.

Doing so helped us decreasing the drag and increasing the maneuvrability without loosing that high speed control which our foils are famous for. The P Stabilizers are available in four sizes, 165/180/200/220. Each of them slightly tweaked to work perfectly with our new front wings.

These new stabs are almost completely flat and have lost the little winglets which can be found on our other range: the C Stabilizers.

By making these changes we were able to loosen the feel in the turns, which gives an exciting flavour to our new front wings.

Take full advantage of our brand new thin shims and tweak the angle of attack of your stabilizer by +/- 0.3 degrees increments, to suit your particular riding style, or the conditions on a given day.

Features

IMPROVEMENT

  • Improved pump and glide over previous Carve range

FAST AND EASY

  • Fast and minimal drag – optimized for each individual size

HANDLING

  • Quick response for intuitive surfing and great pop for freestyle

Specifications

SURFACE (CM / IN²) SPAN (CM / IN) ASPECT RATIO REC. STABILIZER SCREW HOLE 1 (CRBN FL / ALU FL) SCREW HOLE 2 SCREW HOLE 3 (CLOSEST TO MAST)
REC. TORQUE
850 / 131.8 75 / 29.6 6.7 P 180 M8 x 30 M8 x 30 M8 x 30 15 NM
1100 / 170.5 83 / 32.9 6.3 P 200 M8 x 30 M8 x 30 M8 x 30 15 NM
1430 / 221.7 93 / 36.5 6.0 P 200 M8 x 30 M8 x 30 M8 x 30 15 NM

Style Guide

SPEED
High Performance
9
MANOEUVRABILITY
Turns / Carves
9.5
JUMPING
Pop / Landings
9
GLIDE & PUMP
Downwind / Pumping
6
LIFT
Early Flight
6
EASE OF USE
Learn & Progress
6
BUDGET FRIENDLY
Affordable
4

Videos

Reviews

There are no reviews yet.

Be the first to review “Duotone Aero Carve 2.0 SLS Wing Set 2024”

Your email address will not be published. Required fields are marked *